PR110 Pre release specs

This forum is run by Orphek Australia (a MASA Business Partner). Please feel free to use this forum to discuss any topics about products, sales or any general questions you would like us to answer.

Moderator: Moderators

Post Reply
Orphek australia
Centurion Reefer
Posts: 138
Joined: Fri Mar 28, 2014 5:21 am
Posts Per Page: Australia
Contact:

PR110 Pre release specs

Post by Orphek australia »

The New powerhouse of Orphek Lighting PR110

Yes it looks like the PR 72 only about 3 times bigger and has Internal cooling Fan and full wifi with any android device.
Power is 107 watts.
Temperature keeps around 62℃. We set the temp sensor to give warning when the temperature is higher than 65℃. Comes with a 60 degree lens but we changed the light to 45 degree ,but the 60 degree will do fine for at home aquariums.

This Light has been tested and will provide 60 par at 3.5M deep, providing the exact light spectrum needed. With some recent testing locally here in Perth we changed the white light and added 5 X 470nm Blues and 5 X 420nm Cyan and took out the whites. I then replaced some others with 4 X whites. The light produced this Beautiful effect on the tanks tested and replicated the blue of the Ocean. Especially when looking up it was like you where under the water diving.

Enjoy the pics More specs to be released when the light is officially launched.

Image
Image
Image
Image


Image
Image
Image
Image
Image
Image
Numbnuts
Bicentenary Reefer
Posts: 374
Joined: Wed Apr 23, 2014 10:56 am
Posts Per Page: Somerville, VIC

Re: PR110 Pre release specs

Post by Numbnuts »

Do you have overall size of these things? Diameter and height.

Also, how far off the water surface should they be mounted?

I wasn't keen on pendants before, but these look the goods. Would they be released in time for the group buy?

Cheers.
Orphek australia
Centurion Reefer
Posts: 138
Joined: Fri Mar 28, 2014 5:21 am
Posts Per Page: Australia
Contact:

Re: PR110 Pre release specs

Post by Orphek australia »

Numbnuts wrote:Do you have overall size of these things? Diameter and height.

Also, how far off the water surface should they be mounted?

I wasn't keen on pendants before, but these look the goods. Would they be released in time for the group buy?

Cheers.


Ready to go now mate. i would go 500mm off top of tank with 60 degree lenses but you could go higher. these are a cannon so to speak.
Post Reply

Return to “Orphek Australia”