Neptune Apex Available soon

[7044scott]

Hi I have my lights set to come on every day from 4pm till 11pm I would like to know how I can run them at ten% on the weekends from 8am till 4pm

[Aquanet]

Set up the Apex this weekend for a test run,
Great little unit, had the webserver up in 30mins.

One thing i found is that it is not easy to program like the GHL. still trying to get my head around it, But they have a great manual.


Who has signed up for Fusion? looks like it is open to test, but only a few a day can get access.
http://www.neptunesystems.com/apex-fusion-beta/

[ggoosen]

I am an apex fusion beta tester, you can sign up but it's unlikely that you will why an invite , I know many users are asking for access on the Neptune forums


Sent from my iPhone using Tapatalk

[Aquanet]

?? You don't need a invite. It's now open , but they are limiting it daily.

[ggoosen]

?? You don't need a invite. It's now open , but they are limiting it daily.

[Aquanet]

Reeftronics is cool, sends me email if my Apex is down.

https://www.reeftronics.net/

[Aquanet]

How do you telnet into the apex?

i have the eb6 bar but it will not read the amps as it will need to be reset.

[ggoosen]

How do you telnet into the apex?

i have the eb6 bar but it will not read the amps as it will need to be reset.

open cmd prompt from a pc attached to your network by doing the following
Start > run > cmd

once command prompt is open,

type in

telnet <ip address of your apex"

eg

telnet 192.168.0.100


that will telnet you to the base unit, once in there follow instructions as needed.

Be careful though telnet is a last resort, and has the ability to reset and or brick your apex unit.

I suggest you read through the comprehensive user guide found Here > http://www.neptunesystems.com/wp-content/uploads/2013/11/Comprehensive-Reference-Manual-.pdf

[Aquanet]

i can get into dos, but i get to this

c:\users\hp>

when i add telnet 192.168.2.101 it comes up with error message.


anyhow, the amp reading is working, not sure how, i had to move the apex and when i reconnected it started to work when i connected a large pump, so all good

[chromus]

You need to have telnet installed on the machine (its not standard on Home editions) Pro and Ult usually install it by default